Equipment for regeneration of DPF
DPF Master Flash Professional PLUS™
The highest quality device for the regeneration of DPF / FAP / GPF / SCR filters and catalysts. It is made entirely of AISI 304 stainless steel, AISI 316 acid-resistant steel and dedicated to all types of cars. The machine has a double tank with a capacity of 275 liters, a pressure pump output of up to 250 l / min and an integrated filter drying system.
An Italian pump has been used with a chemical seal resistant to contamination and electronics based on components from leading European manufacturers that guarantee the highest quality and reliability of the device. The machine can measure in a dry environment (counter pressure measurement) and has an integrated filter drying system at a temperature of 70-130 degrees. The filtration system extended with a preliminary filter allows to significantly extend the service life of the main filters. The device can operate in automatic or service mode, which allows for individual use of the selected option. The hydrodynamic method used in conjunction with the unique, dedicated XTON DPF CLEANER chemistry removes the residues of PM10, PM 2.5 cerium oil and heavy metals carbon deposits without mechanical interference with the filter and allows to restore its factory efficiency to 99.8%.
EQUIPMENT:
- 7″ color touch screen
- sensors: liquid level, liquid and air temperature, pressure flow, door opening, loss and phase sequence
- protections: emergency safety switch, end protections of the chamber door, loss and phase sequence,
- filter contamination measuring system
- AISI 316 stainless steel chamber
- extended 4-stage liquid filtration system
- two heaters
- integrated drying system in a smooth temperature range from 70 to 130 ° C
- cooling the drying system
- integrated thermal printer for printing filter parameters
- Ethernet controller for remote diagnostics
- set of connection adapters for DPF / FAP / GPF / KAT / SCR filters
- EURO5 and EURO6 adapter
- starter kit for consumables (a set of filters + 2L XTON DPF Cleaner detergent)
- liquid tank with a capacity of up to 275 liters
- extended 12-month manufacturer’s warranty (optional 24 or 36 months)
ADDITIONAL OPTIONS:
- automatic filter cleaning on both sides
- a second fluid circuit with an additional pump
- thermal insulation of the liquid tank
- automatic liquid top-up
- quick-X filter mounting system
Learn how DPF Master Flash™ machines work
Technical parameters of the DPF Master Flash Professional PLUS™
| Weight | 650 kg |
| External dimensions (L x W x H) | 206 x 126 x 215 cm |
| Chamber dimensions (L x W x H) | 140 x 89 x 107 cm |
| Tank capacity | 275 liters |
| Working pressure | 6 -8 bar (90-100 psi) |
| Voltage | 3 x 400V |
| Max power | 12 kW |
| Frequency | 50 Hz |
| Water connection (supply) | 1/2” |
| Water connection (drain) | 6/4” |
| Air connection | pneumatic quick connector DN7.2, plug |
| Ambient temperature | 5 – 35° C |
| Noise level during operation | > 70 dB |
| Fluid temperature | adjustable from 30 to 100°C |
| Drying temperature | adjustable from 70 to 130°C |
| Optimal operating temperature | 38°C |
| Pressure hoses diameter | 6/4” |
| Cleaning pump performance | up to 250 l/min |
| Fluid filtration | 4-stage liquid filtration, 5 – 300 microns – extended |
| Air flow rate | Up to 430 m³ / h |
| Overpressure | up to 370 mbar |
| Vacuum | up to 300 mbar |
| Pre-fuse | 32 A |
| Pollution measurement system | expressed in mbar and kPa units |
| Drying system | integrated drying system |
| Filter cartridges | 5 pcs |
| Security | temperature sensor pressure sensor door opening sensor emergency safety switch liquid flow sensor |
Are you seeking for more information?
For more information, downloadable files realted to this product or configuration tools, visit our continental webite – xton.eu.